How to Do a New Construction Cleaning

How to Clean a New Construction?

 

What is a New Construction Cleaning? A new construction cleaning is simply a thorough clean of a newly constructed house or business. You may be wondering what it all means, considering that everything is brand new. You want to clean away any dirt from building materials before they can set in. It will protect your investment by making sure there are no stains or blemishes on the plywood floors and paint. It protects all surfaces against potential damage, such as rusting metal trim on the windowsills and doorjambs.

 

Cleaning materials required

 

Vacuum Cleaner: To clean up fine dust particles from woodworking tools, such as jointers and table saws. The vacuum will remove any dust, chalk lines, or leftover sealant. Make sure to vacuum the stairs, edges of baseboards, and window sills. To make sure there is no debris left, vacuum the floor again.

 

Grab a broom and a dustpan: Get rid of any sawdust or other debris that has gotten stuck in corners or difficult-to-reach areas. Make sure to sweep up all sawdust and other debris.

 

Baking soda: Baking soda is great to remove any odors. It can neutralize the smells of paint, sealants, or stains that are used in new construction cleaning. Sprinkle baking soda on damp floors and scrub with a mop.

 

Bleach: Bleach is an excellent cleaner to kill any mold or mildew. As too much bleach can prove to be dangerous, make sure you mix it with water following the directions on the label. Bleach can also be used to remove grease stains and soap buildup on tiles after tile cleaning.

 

Sponges: Make sure to keep a bucket full of warm water and make sure you squeeze all the sponges before you use them. You can use the sponges to clean up any construction adhesive or grime. Use it to wipe down cabinets, doors, and all other surfaces.

 

Polish: Polish can be used for removing fingerprints or dirt from freshly painted walls. Use baking soda and water to make a paste, then polish the appliances, tiles, and cabinets.

 

After vacuuming, use a mop, bucket, and squeegee. Clean the floor. To remove water from windows and doors, clean them both using a sponge. You can clean up any water left behind with a mop, dipped in warm soapy water. To avoid water streaks on floors, walls, and other surfaces, use the squeegee.

 

Dustcloths: Use dustcloths to clean windows and mirrors. You can also use a dust cloth to clean knick-knacks or other delicate items that you don't want to use a sponge on.

 

Rubber gloves: To protect your hands from getting irritated by cleaning agents, wear rubber gloves and ensure that you do not get chemicals in your skin.

 

Protective equipment: Wear rubber boots or gloves made from latex to protect your eyes from dirt and dust. To block out any noise that may be too loud, you can use a dust mask as well as earplugs.

 

You Can Do It Yourself

 

This is a simple way to make sure your construction site looks clean.

 

To begin, make sure your windows are sealed properly and that there are no cracks. It is important to replace damaged window frames or glass in cracks immediately. This will prevent water from getting inside the windows and causing mold growth. Inspect the metal trim around windows like sill plates or doorjambs that surround exterior doors for moisture damage. You can remove the trim and then paint it again with Rust-Oleum Filler Primer. It is important to clean these surfaces and prevent future corrosion from trapped moisture under the surface of objects, such as wood sills/jambs. These could cause rot.

 

Next, check the doors for air leakage and cracks. To ensure that there are no gaps in the floor between your door and the threshold of the building's entryway, you should inspect it as well. Use a caulk gun, or non-hardening sealant to fill the gaps with silicone-based epoxy. You should inspect all entryways to your home/building. This includes exterior windows, interior sliding glass doors, and the front door. You should do the same on both sides. You can then test each doorway by sealing them tight. If your pinkie finger fits in the cracks, you will need to seal them.

 

Next, look for any chips or cracks on exterior painted surfaces that could cause rust spots later. You can use a putty blade (or non-hardening, weather sealant) to touch up any paint chips or nicks. You should also make sure there is no seam where two sheets of sheetrock meet. These should be filled using joint compound and painted with primer/paint. Next, give all floors - tiled and carpeted - a good clean using an industrial vacuum like a shop vacuum. Once the flooring is clean, check for damage such as loose grout or damaged edges. You can apply a spackle or a non-hardening weather sealing agent to these areas using a putty blade. Then, let it dry for 24hrs before applying the final coat.

 

Next, examine all walls from the inside and outside for any scuffs. You can clean dust particles off walls with a wet cloth. Then, you can use an angle brush to wipe down entire surfaces with primer/paint. Be sure to pay attention to baseboards as well as doorknobs/fixtures. These are high-traffic places where dirt can stick. To avoid noticing it when the walls are painted, you will want your primer paint to match exactly.

 

Next, examine all tiles and carpeted floors to see if there are any cracks or damage. You can use a putty blade to re-grout or non-hardening rain sealant along with the cracked tiles. Next, dry it overnight and then paint/primer with an angled brush. Clean out the vents by vacuuming the inside and underside of them. This will prevent insects' from nesting. Make sure to cover up your AC unit completely with plastic sheeting before you go. It could damage the unit if it is left exposed.

 

You can also cover the entire exterior of the building with plastic sheets before final inspection. Large sheets can be taped together along seams, then draped across the protected area. Do not use duct tape to damage brick or siding! Once you're done, place cones around the perimeter to await the inspector's decision. Assume that any repairs will need to be made at the bottom. This will allow you to access the underside of your home/building once it is completed. You should not let anyone in before you have finished working on the windows or doors. They could be injured by nails sticking out of scaffolding planks.

 

Here are some tips to clean dust from new construction

 

It is important to know how to clean new construction. This list contains helpful tips to help you learn the right techniques.

 

Clean out every room. Clean and sweep tile floors and hardwood floors before you start to clean carpeted areas. This will prevent them from getting too saturated later. To make it easier to vacuum dust around walls and other small spaces, where dirt tends to accumulate over time, ensure your vacuum has a hose attachment.

 

Next, clean windowsills, sills below doors/windows, and any panes that appear to have visible dust. This is an essential step in new construction cleaning. Without washing windowsills and other surfaces close to them, there will be lots of dirt buildup.

 

Next, wash the walls with an all-purpose cleaner. Use paper towels or microfiber cotton rags for quick drying. Use water in small amounts throughout the cleaning process so that carpets are not saturated. After your walls are completely dry, vacuum them.

 

Once you are done, remove the vacuum and move around, picking up all debris from every carpeted area. For extra clean-up, you might want to do a second sweep if the floors are very filthy.

 

Now you are ready to mop your floors again after you have finished all of the above steps. This will ensure that they are clean and free from any dust.

 

Ensure that all personal and clothing items are completely dry before you transfer them to the next room. Avoid any contact with moisture that might be left behind after the cleaning process is complete. It would ruin the entire purpose of cleaning new construction.

 

Hiring professional cleaning services like NW Maids is the best option if the time is tight. Reviewing their site are a great way to locate a trustworthy company. Ask questions about their company's services and meet up with them if possible to find out if you are a good match.

Contact NW Maids to learn more. https://nwmaids.com

 

Contact the NW Maids Tacoma location:

NW Maids Tacoma Cleaning Service

2367 Tacoma Avenue South

Tacoma, Washington 98402

(253) 793-1664

https://nwmaids.com/locations/tacoma

https://www.google.com/maps?cid=13687882319685200525